KL400
| Shutter | Rolling |
| Sensor Type | Front and Back Illuminated |
| Resolution | 2048x2048 |
| Pixel size | 11 microns |
| Imaging area | 22.5mm x 22.5mm |
| Linear full well capacity (e-) | 120000 (FI) / 90000 (BI) |
| Read noise (RMS) | 1.5 e- (FI) / 1.6 e- (BI) |
| Maximum Frame Rate | 48fps (24 fps HDR) |
| Interface | USB 3.0, optional QSFP fiber |
| Peak QE | 58% (FI) / 95% (BI) |
| Dynamic Range (HDR) | 96 dB (FI) / 93 dB (BI) |
| Dark Current @ -20C | 0.2 eps (FI) / 0.6 eps (BI) |
| Regulatory Certifications and Standards | |
| Software / OS Requirements | FLIPilot |
| Operating Temperature | |
| Operating Humidity | Non-condensing |
| Physical Dimensions | See Mechanical Darwing |
| Weight | 2.65 lbs (1.2 kg) |
| Electrical Requirements | 110-240V AC, 50-60 Hz, 2 Amp max draw |
| System Power | |
| IP Classification |
Mechanical Drawings
KL400
The KL400’s back-illuminated sensor has a peak quantum efficient of 95%, making it one of the most sensitive sensors on the market. The camera can reach video rates at full resolution with as little as 1.6 electrons RMS noise.
KL400 operation features
Front-illuminated KL400 specifications
Back-illuminated KL400 specifications
KL 400 Specifications
These specifications are subject to change without notice.
Kepler
Kepler is FLI’s new series of cooled cameras, providing higher throughput, more channels, and a variety of new sensors, including scientific CMOS.
The official Kepler documentation, including specifications for each camera and sensor available in the Kepler family is available at flicamera.com/kepler/kepler.html.
An overview of the Kepler family is available at flicamera.com/pdf/KeplerOV.pdf.
A setup guide for the Kepler family cameras can be accessed on the Set Up Page.
An overview of the auxiliary connector on the Kepler cameras and the modes of indication of exposure processes can be accessed on the Connectors Page.
Model: KL 4040
KL4040
| Shutter | Rolling |
| Sensor Type | Front Illuminated |
| Resolution | 4096 x 4096 |
| Pixel size | 9 microns |
| Imaging area | 36.9mm x 36.9mm |
| Linear full well capacity (e-) | 70000 electrons |
| Read noise (RMS) | 3.7e- |
| Maximum Frame Rate | 24FPS |
| Interface | USB 3.0, optional QSFP fiber |
| Peak QE | 74% |
| Dynamic Range (HDR) | 86dB |
| Dark Current @ -20C | 0.15 eps |
| Regulatory Certifications and Standards | |
| Software / OS Requirements | FLIPilot |
| Operating Temperature | |
| Operating Humidity | Non-condensing |
| Physical Dimensions | See Mechanical Drawing |
| Weight | 2.65 lbs (1.2 kg) |
| Electrical Requirements | 110-240V AC, 50-60 Hz, 2 Amp max draw |
| System Power | |
| IP Classification |
The KL4040 scientific CMOS camera has the same pixel size and imaging area as the popular KAF-16803
CCD, but with 1/3 the noise and 40% higher quantum efficiency. Kepler cooled sCMOS cameras provide ultra-
high sensitivity, ultra-low noise, and high frame rates, all at game-changing price to performance ratio.
Front-illuminated KL4040 Specifications
These specifications are subject to change without notice.
Finger Lakes Instrumentation, a division of IDEX Health & Science LLC
1250 Rochester St.
Lima, New York 14485
1250 Rochester St.
Lima, New York 14485
Phone: 585-624-3760
Email: support@flicamera.com
Web: www.flicamera.com
Email: support@flicamera.com
Web: www.flicamera.com
©2023 IDEX Health & Science LLC
